Toshiba Satellite 110 Series User Manual Download Page 281

Page: 281 / 438

If Something Goes Wrong…

Fixing Device Related Problems

Part I: Getting To Know Your Computer

251

The Keyboard

If, when you type, strange things happen or nothing happens, the
problem may or may not be related to the keyboard itself.

The keyboard produces unexpected characters.

A keypad overlay may be on. If the numeric keypad or cursor con-
trol light is on, press

F10

to turn off the cursor control light or

F11

to turn off the numeric keypad light.

Make sure the software you are using is not remapping the

keyboard.

You’ve connected an external keyboard and Windows 95 displays

one or more keyboard error messages.

The keyboard you connected may be defective or incompatible
with the computer. Try using a different brand of keyboard.

Nothing happens when you press the keys on the external

keyboard.

Make sure the PS/2 keyboard is plugged into the PS/2 keyboard
port and not the PS/2 mouse port on the NoteDock™.

You may have plugged the external PS/2 keyboard in while the
computer was turned on. Press

Ctrl

Alt

Del

or press the reset but-

ton to restart the computer so it recognizes the device.

The keyboard locks and the computer will not restart.

Make sure the power is on and press the reset button.

The AccuPoint

Some of the keyboard conditions listed above may also affect the
AccuPoint.

Your finger easily slides off the AccuPoint.

The AccuPoint cap may be oily. Remove the cap and clean it with
a cotton swab dipped in rubbing alcohol.

Summary of Contents for Satellite 110 Series























































































































































































































































































































































































































































Search results

Summary of Contents for Satellite 110 Series

Reviews:

Related manuals for Satellite 110 Series

Brands by name

Popular brands

Toshiba Satellite 110 Series, User Manual

Search results

Summary of Contents for Satellite 110 Series

Reviews:

Related manuals for Satellite 110 Series

Brands by name

Popular brands