Toshiba e-Studio477s, Service Manual, Page: 401 / 482

e-STUDIO477S/527S
05/08 Mode Element Sub Element Item Subitem Code
Sub-
Code
Details
Default
value
Acceptable
value
RAM Contents
Proc
edure
ServiceUI
08 Debug level setting Sets the output volume of debug log. When the
value is set to "0", the performance may decrease.
0: Debug log level – high
2: Debug log level - normal
Setting
mode
System 8942 2 0, 2 1 -
08 Automatic user registration
for card authentication
0: Disabled
1: Enabled
Setting
mode
System User interface Card reading
device
8947 0 0~1 1 SSDK
08 Language package
information
Displays the information of the installed language
package.
Setting
mode
System User interface 8948 2 Yes -
08 External version of HD data External version of file system for system software Setting
mode
System Version 8952 2 -
08 Panel Help Displays the language package information of the
installed Panel Help.
Setting
mode
System User interface General Language
package
information
8968 2 Yes -
08 WebHelp Displays the language package information of the
installed WebHelp.
Setting
mode
System User interface General Language
package
information
8969 2 Yes -
08 Service UI Displays the language package information of the
installed Service UI.
Setting
mode
System User interface General Language
package
information
8970 2 Yes -
08 Installation of language
package
Installs the language package. Setting
mode
System User interface General 8971 3 Yes -
08 Length of public key 0: 1024 bit
1: 2048 bit
Setting
mode
System General Self-certificate 8973 1 0~1 1 SYS
08 Signature algorithm 0: SHA1
1: SHA224
2: SHA256
3: SHA384
4: SHA512
Setting
mode
System General Self-certificate 8974 0 0~4 1 SYS
08 Data clearing of Point and
Print
Point and Print in the equipment is deleted when
this code is performed. Perform this code when a
trouble occurs such as when uploading Point and
Print is not possible. After performing this code,
upload Point and Print from [Maintenance] menu in
the [Administration] menu of TopAccess.
Setting
mode
System Network 8975 3 SYS
08 Copy Sets whether the originals that are prohibited from
duplication are detected or not.
0: Detection disabled
1: Detection enabled
Setting
mode
System General Detection of
originals
prohibited from
duplication
8977 0 1 0~1 4 SYS
08 Scan Sets whether the originals that are prohibited from
duplication are detected or not.
0: Detection disabled
1: Detection enabled
Setting
mode
System General Detection of
originals
prohibited from
duplication
8977 1 1 0~1 4 SYS
08 FAX Sets whether the originals that are prohibited from
duplication are detected or not.
0: Detection disabled
1: Detection enabled
Setting
mode
System General Detection of
originals
prohibited from
duplication
8977 2 1 0~1 4 SYS
08 Execution of Remote Scan
while control panel is
operated
Sets whether the remote scanning is enabled or
disabled if the user is logged in using the control
panel when user authentication or department
management is enabled.
0: Disabled
1: Enabled
Setting
mode
System Scanning 8980 0 0~1 12 NIC
48 Ver03 08 Setting Mode