manualshive.com logo in svg

Toshiba e-Studio477s, Service Manual, Page: 2 / 482

Share
Download
Toshiba e-Studio477s Service Manual Download Page 2

Trademarks

• The official name of Windows

®

 Vista is Microsoft Windows Vista Operating System.

• The official name of Windows

®

 7 is Microsoft Windows 7 Operating System.

• The official name of Windows

®

 8.1 is Microsoft Windows 8.1 Operating System.

• The official name of Windows

®

 10 is Microsoft Windows 10 Operating System.

• The official name of Windows Server

®

 2008 is Microsoft Windows Server 2008 Operating System.

• The official name of Windows Server

®

 2012 is Microsoft Windows Server 2012 Operating System.

• Microsoft, Windows, Windows NT, and the brand names and product names of other Microsoft 

products are trademarks of Microsoft Corporation in the US and other countries.

• Apple, AppleTalk, Macintosh, Mac, Mac OS, Safari, iPhone, iPod touch, TrueType, AirPrint, AirPrint 

logo, and iPad are trademarks of Apple Inc.

• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used 

under license.

• Adobe, Acrobat, Reader, and PostScript are trademarks or Adobe Systems Incorporated.
• Mozilla

®

, Firefox

®

 and the Firefox logo

®

 are trademarks or registered trademarks of Mozilla 

Foundation in the U.S. and other countries.

• IBM, AT and AIX are trademarks of International Business Machines Corporation.
• NOVELL

®

, NetWare

®

 and NDS

®

 are trademarks of Novell, Inc.

• FLOIL

®

 is a registered trademark of Kanto Kasei CO., Ltd.

• MOLYKOTE

®

 is a registered trademark of Dow Corning Corporation.

• KAPTON

®

 is a registered trademark of E. I. du Pont de Nemours and Company.

• Sankol

®

 is a registered trademark of SANKEIKAGAKU CO.,Ltd.

• e-STUDIO, e-BRIDGE, and TopAccess are trademarks of Toshiba Tec Corporation.
• Other company names and product names in this manual are the trademarks of their respective 

companies.

© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved

Under the copyright laws, this manual cannot be reproduced in any form without prior written permission 
of TOSHIBA TEC CORPORATION.

Summary of Contents for e-Studio477s



































































































































































































































































































































































































































































































Reviews:

No comments