Toshiba e-Studio477s, Service Manual, Page: 357 / 482

e-STUDIO477S/527S
05/08 Mode Element Sub Element Item Subitem Code
Sub-
Code
Details
Default
value
Acceptable
value
RAM Contents
Proc
edure
ServiceUI
08 Image position and size
setting at the time of
forwarding received fax jobs
This setting is applied only when a received fax job
is forwarded with a pdf format file.
0: Sets to select the paper size from the drawers in
which paper is loaded by corresponding to an
image size. The image position is the upper part of
the paper.
1: Sets to select the paper size from the drawers in
which paper is loaded by corresponding to an
image size. The image position is the center part of
the paper.
2: Sets to select a standard size paper
corresponding to an image size. The image
position is the upper part of the paper.
- If "FAX" has been set as the attribute of a drawer,
its paper size will be applied when "0" or "1" is
selected.
Setting
mode
System FAX 3659 1 0~2 1 Yes SYS
08 Fax operation setting during
off-hook transmission
0: Transmission is not operable during off-hook
1: Direct transmission is operable during off-hook
2: Transmission is operable during off-hook
Setting
mode
System FAX 3661 1 0~2 1 SYS
08 Waiting period for continue
after the RADF scanning
0: Disabled 1: Enabled
* When "Enabled" is set, the screen to notify
continuity appears for 1 second after RADF
scanning has been completed.
Setting
mode
System Scanning 3662 0 0~1 1 SYS
08 Drum 0: Disabled 1: Enabled Setting
mode
System Notification
setting
Time for
replacement
3663 0 0~1 1 SYS
08 Fuser unit 0: Disabled 1: Enabled Setting
mode
System Notification
setting
Time for
replacement
3664 0 0~1 1 SYS
08 Process of user
authentification(ShimpleBind
)
0: Normal process
1: Special process
Setting
mode
System 3666 0 0~1 1 SSDK
08 Addition of the QR code to
the total counter list
0: Disabled
1: Enabled
<Default value>
JPD: 1
Others: 0
Setting
mode
System 3667 Refer to
contents
0~1 1 Yes SYS
08 Department management
setting(UserFunction)
0: Disabled
1: Enabled
Setting
mode
System Department
management
3669 0 0~1 1 SYS
08 User management
setting(UserFunction)
0: Disabled
1: Enabled
Setting
mode
System User
authentication
3670 0 0~1 1 SSDK
08 Setting for each debug log
file size
0: 5M
1: 10MB
Setting
mode
System 3672 0 0~1 1 SYS
08 In one-go setting from a
USB storage device
When processing is carried out, a setting file is
read from a USB storage device and the setting
values of the self-diagnostic codes listed in the
setting file are written sequentially.
Setting
mode
System Self-diagnostic
codes in one-
go setting
3673 3 Yes -
08 Specifying whether to
display the network timeout
error page on the EWB or
not
0:Not displayed
1:Displayed
Setting
mode
System Network 3674 0 0~1 1 SYS
08 Change of Remote-access-
service user password
Maximum 65 letters
Sets a password for a built-in user "Remote-
access-service".
Setting
mode
System Security 3676 #1048#toshi
ba
11 SSDK
4 Ver03 08 Setting Mode