Toshiba e-Studio477s, Service Manual, Page: 396 / 482

e-STUDIO477S/527S
05/08 Mode Element Sub Element Item Subitem Code
Sub-
Code
Details
Default
value
Acceptable
value
RAM Contents
Proc
edure
ServiceUI
08 Default setting of duplex
mode for printer driver
0: Single-sided 1: Duplex
<Default value>
JPD: 0
Others: 1
Setting
mode
System User interface 8795 Refer to
contents
0~1 1 SYS
08 Reboot setting for resource
check
0: OFF 1: ON Setting
mode
System Maintenance General 8797 0 0~1 1 SYS
08 Default setting of original
size(using original glass)
0: Not set
1: Set
Setting
mode
System General 8799 0 0~1 1 SYS
08 Enable/Disable setting 1: Enabled 2: Disabled Setting
mode
System Network IEEE802.1X 8800 2 1~2 12 NIC
08 Enable/Disable setting 1: Enabled 2: Disabled Setting
mode
System Network IPsec 8802 2 1~2 12 NIC
08 Enable/Disable setting 1: Enabled 2: Disabled Setting
mode
System Network SNMPv3 8803 2 1~2 12 NIC
08 Enable/Disable setting 1: Enabled 2: Disabled Setting
mode
System Network IP Filtering 8804 2 1~2 1 SYS
08 Enable/Disable setting 1: Enabled 2: Disabled Setting
mode
System Network MAC Address
Filtering
8805 2 1~2 1 SYS
08 Enable/Disable setting 1: Default (IKEv1: Disabled, IKEv2: Enabled)
2: Enable IKEv1 & IKEv2
3: Disable IKEv1 & IKEv2
Setting
mode
System Network IPsec NAT-Traversal 8820 1 1~3 12 NIC
08 Enable/Disable setting 1: Enable CRL
2: Disable CRL
Setting
mode
System Network IPsec CRL 8821 2 1~2 12 NIC
08 FTP client mode Sets the FTP transfer mode when FTP is selected
for "FILE" to save the scanned data.
0: Automatic
1: Passive mode
2: Active mode
Setting
mode
System Network 8824 0 0~2 12 NIC
08 Sending host
announcement in Super
Sleep mode
Sets whether sending host announcement in the
super sleep mode is enabled or not.
Enable this setting to always display the MFP in the
browse-list since MFP is deleted by the master
browser of the Windows network if MFP is in the
super sleep mode for 36 minutes or more.
1: Enabled
2: Disabled
Setting
mode
System Network 8825 1 1~2 12 NIC
08 Enable/Disable setting Sets whether the function that gets the secondary
DNS server to work as the primary DNS server
temporarily is enabled or not when the primary
DNS server is not available.
1: Enabled 2: Disabled
Setting
mode
System Network Dynamic update
of DNS server
8826 1 1~2 12 NIC
08 Operating interval Sets the operating interval of dynamic update.
1-1440 (min.)
Setting
mode
System Network Dynamic update
of DNS server
8827 60 1~1440 12 NIC
08 Beep setting to identify
printer for AirPrint IPP
Sets whether the beep for identifying printer is
emitted or not when IPP is used for AirPrint.
0: No beep
1: Emits beep
Setting
mode
System Network 8830 0 1 0~1 4 SYS
08 Blinking setting to identify
printer for AirPrint IPP
Sets whether the blinking for identifying printer is
enabled or not when IPP is used for AirPrint.
0: Disabled (No blinking)
1: Enabled
Setting
mode
System Network 8830 1 1 0~1 4 SYS
43 Ver03 08 Setting Mode