Toshiba e-studio222cs User Manual Download Page 68

Page: 68 / 166

Printing > 68

RINTING

This chapter details how to use the following print options from the control panel:

Job Lists

Print Job (e-STUDIO263CS only)

Print from USB memory

Switch Online/Offline

For full details of how to use your machine and any optional accessories to print jobs

efficiently and effectively, please refer to the Printing Guide and the Barcode Printing Guide.

e-STUDIO263CS only:

For full details of how to access and use the security features,

please refer to the Security Guide.

LISTS

You can cancel a print job by deleting it from the job list:

Press the

Print

button (1) on the control panel to prompt the

Print Menu

screen.

Press

to select

Job Lists

Using the arrow keys, scroll to the job you want to cancel and then press

NOTE
If your Administrator has enabled access control on your machine, it will
automatically start up in access control mode. You will not be able to use it
until you have provided valid login information. Refer to

“User authentication

and access control” on page 35

for details.

Print From USB Memory

Print Job

Job Lists

Summary of Contents for e-studio222cs







































































































































































Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands

Toshiba e-studio222cs, User Manual

Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands