Toshiba e-studio222cs User Manual Download Page 9

Page: 9 / 166

About this guide > 9

BOUT

THIS

GUIDE

OCUMENTATION

SUITE

This guide is part of a suite of online and printed documentation provided to help you

become familiar with your product and to make the best use of its many powerful features.

The documentation is summarised below for reference and is found on the manuals DVD/

CD unless indicated otherwise:

Installation Safety booklet:

provides information for safe use of your product.

This is a paper document that is packaged with the product and should be read before

setting up your machine.

Set-up guide:

describes how to unpack, connect and turn on your product.

This is a paper document that is packaged with the product.

User’s Guide:

helps you become familiar with your product and make the best use

of its many features. Also included are guidelines for troubleshooting and

maintenance to ensure that it performs at its best. Additionally, information is

provided for adding optional accessories as your printing needs evolve.

Configuration Guide:

provides machine, fax and network configuration

information.

Printing Guide:

helps you become familiar with the many features of the driver

software supplied with your product.

Barcode Printing Guide:

helps you become familiar with your product’s built in

barcode printing feature.

Security Guide:

helps you become familiar with your product’s security features.

Installation Guides:

accompany consumable items and optional accessories to

describe how to install them.
These are paper documents that are packaged with the consumables and optional

accessories.

On-line Help:

on-line information accessible from the printer driver and utility

software.

URPOSE

THIS

GUIDE

The purpose of this guide is to provide you with in-depth information on how to use your
machine efficiently and effectively for printing, copying, scanning and faxing

NOTE
Images used in this manual may include optional features that your product
does not have installed.

NOTE
The User Guide assumes that the machine has been set up and fully
configured. Refer to the Setup Guide and Configuration Guide for guidance.

1. e-STUDIO223CS and e-STUDIO263CS only.

Summary of Contents for e-studio222cs







































































































































































Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands

Toshiba e-studio222cs, User Manual

Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands