Toshiba e-studio222cs User Manual Download Page 26

Page: 26 / 166

Getting started > 26

UTILITY

The ActKey utility enables the MFP to receive one key touch commands from a connected

computer.
Installation of the ActKey utility is optional and can be found on the DVD/CD in the Utilities

folder.
Information on using the ActKey utility can be found in

“Scan to remote PC” on page 59

Setting up the ActKey utility

Install the ActKey utility from the DVD/CD:
Set-up will place an “ActKey” icon on your desktop.

Double-click this icon to open the ActKey console.

Select

Options > Button Settings

. The following screen displays.

Select the function you want to set in section (1).

Set the parameters for this function in section (2).

When you have completed settings, press

(3).

The Utility will return to the ActKey console.

NOTE
The ActKey utility only supports Windows.

You must have the scanner driver installed.

Summary of Contents for e-studio222cs







































































































































































Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands

Toshiba e-studio222cs, User Manual

Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands