Toshiba e-studio222cs User Manual Download Page 132

Page: 132 / 166

Troubleshooting > 132

Machine is connected to a PBX but it is not possible to dial out:

Be certain that the

dial prefix is entered before the telephone number for each number dialled or programmed

into the machine. Additionally, the machine must be programmed for PBX operation before

it will work with a PBX (refer to the Configuration Guide for details).

Machine always answers before it’s possible to use the external telephone:

If an

external telephone is connected, increase the machine’s ring response setting (see

“Ring

Response” on page 147

Faxes received sometimes look distorted:

If the document received is wider or longer

than the paper loaded in the paper tray, the machine automatically reduces the width or

length of the document so that it will fit on the paper. This type of problem could also be

communication related.

Summary of Contents for e-studio222cs







































































































































































Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands

Toshiba e-studio222cs, User Manual

Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands