Toshiba e-studio222cs User Manual Download Page 76

Page: 76 / 166

Faxing - e-STUDIO223CS and e-STUDIO263CS only > 76

Broadcasting

This function allows you to send a fax to multiple recipients at the same time. By combining

abbreviation dials, groups and entering addresses using the numeric keypad, you can

specify up to 100 destinations at one time.

Deleting specified destinations

You can cancel an individual destination within a broadcast job.

Make sure that the required destination is selected on the fax standby screen and

then press

Using the arrow keys, scroll to the destination you want to delete and then press

A check box is selected. You can select multiple entries.

When you have selected all the destinations to be deleted, press the

Right

arrow

key.

Make sure that

Delete this destination

is selected and then press

Manual redial

Your machine is set to redial automatically (refer to

“Redial Tries” on page 147

), if you wish

to manually redial:

Press the

FAX

button on the control panel.

Press

to select

Fax

Press

to select

Add Destination

Using the

Down

arrow key, scroll to

Tx History

and press

Using the arrow keys, scroll to the required destination and press

The check box is selected. You can select multiple entries.

When you have selected all the destinations, press the

Right

arrow key.

Press

to select

Finish Destination Selection

Press the

Mono

button (3) to start sending your document(s).

NOTE
When real time transmission (Memory Tx set to OFF) or polling is executed
during broadcasting data, they are executed preferentially. In the case of
polling, it is executed preferentially when there is only one address specified.

When Broadcast Destination is enabled, the destination numbers are
displayed before transmission. Refer to

“Broadcast Destination” on page 146

Summary of Contents for e-studio222cs







































































































































































Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands

Toshiba e-studio222cs, User Manual

Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands