Toshiba e-studio222cs User Manual Download Page 103

Page: 103 / 166

Maintenance > 103

MAGE

DRUM

REPLACEMENT

The image drum assembly comes complete with its own installation details which give full

instructions on replacement. You are advised to follow these instructions carefully.

EPLACING

THE

TRANSFER

BELT

UNIT

The belt unit is located under the image drum assembly.
Switch off the MFP and allow the fuser to cool for about 10 minutes before opening the

cover. Refer to

“Switching off” on page 19

for details.

Gently raise the scanner.

Press the cover release (a) and open the top cover (b) fully.

Holding it by its handles, lift the image drum assembly, complete with toner

cartridges, up and out of the printer.

WARNING!

If the MFP has been powered on, the fuser will be hot. This area is

clearly labelled. Do not touch.

Summary of Contents for e-studio222cs







































































































































































Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands

Toshiba e-studio222cs, User Manual

Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands