Toshiba e-studio222cs User Manual Download Page 70

Page: 70 / 166

Printing > 70

RINT

FROM

USB

MEMORY

ASIC

OPERATION

Plug the USB memory into the USB port at the front of the machine.

Press the

Print

button (1) on the control panel to prompt the

Print Menu

screen.

Using the

Down

arrow key, scroll to

Print From USB Memory

and press

Ensure

Select Print File

is highlighted, then press

The list of supported files on the USB stick are display.

NOTE
Supported file systems: FAT12, FAT16, FAT32.

Supported file formats: JPEG, PDF (v1.7), M-TIFF (v6 Baseline), PRN (PCL,
PS).

Supported: Up to 32 GB capacity of USB memory.

Not Supported: USB hubs, external USB HDDs and encrypted PDFs.

NOTE
Up to 100 files in supported file formats stored in USB memory are displayed
on the file list. If more files are stored in USB memory, the list of the stored
files may not be displayed properly.

You can select and print one file in your USB memory at a time.

Print From USB Memory

Print Job

Job Lists

Summary of Contents for e-studio222cs







































































































































































Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands

Toshiba e-studio222cs, User Manual

Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands