Toshiba e-studio222cs User Manual Download Page 23

Page: 23 / 166

Getting started > 23

PRINTER

DRIVER

The information in this section is based on Mac OS X Leopard (10.5). Other versions may

appear slightly different, but the principles are the same.

Insert the DVD/CD-ROM and run the driver installer program.

Follow the on-screen instructions to install the printer driver.

Attach the printer to a USB port of your computer.

Switch on the printer.

Choose

Apple Menu > System Preferences > Print & Fax

If the printer is already in the list of printers, click “

” to remove it.

Click “

” to add a new printer.

Ensure:

The

Default

tab is selected and select your machine from the list.

Your machine is displayed as

Kind

“USB” in the list of available printers.

The

Print Using:

selection matches your machine.

If “Generic PostScript Printer” is displayed, select a driver that matches.

Click

Add

10.

Click

Configure...

and ensure the hardware options displayed match your machine.

11.

The printer is added to the list of printers.

12.

Restart your computer.

NOTE
This is necessary as Leopard may not be using the correct printer driver files.

NOTE
Hardware options are not configured automatically.

USB

e-STUDIO263CS-EB0E1A

e-STUDIO263CS(PS)

Summary of Contents for e-studio222cs







































































































































































Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands

Toshiba e-studio222cs, User Manual

Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands