Toshiba e-studio222cs User Manual Download Page 115

Page: 115 / 166

Installing upgrades > 115

CARD

(e-STUDIO263CS

ONLY

)

The SD card enables collating of printed pages and can be used to store overlays and

macros, fonts, and secure or proof documents waiting to be printed.
Your machine is fitted with a 4GB class 6 SD card as standard. If you wish you can upgrade

this as your machine supports 16GB class 6 SD cards. After replacement, you need to

configure the printer driver settings. Refer to

“Setting the driver device options” on

page 118

Switch the MFP off and disconnect the power cable. Refer to

“Switching off” on

page 19

for details.

Remove the outer access cover and place it safely to one side.

Turn locking screw (a) anti-clockwise and remove the inner access cover (b). Place it

safely to one side.

Notice that the SD card has one chamfered corner.

Summary of Contents for e-studio222cs







































































































































































Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands

Toshiba e-studio222cs, User Manual

Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands