Toshiba e-studio222cs User Manual Download Page 112

Page: 112 / 166

Installing upgrades > 112

NSTALLING

UPGRADES

This section explains how to install optional equipment into your MFP. This includes:

additional RAM memory

SD card (

e-STUDIO263CS only

)

additional paper tray

EMORY

UPGRADE

The basic models come equipped with 256MB of main memory. This can be upgraded with

an additional memory board of 256MB or 512MB, giving a maximum total memory capacity

of 768MB.

Switch the MFP off and disconnect the power cable. Refer to

“Switching off” on

page 19

for details.

Remove the outer access cover and place it safely to one side.

Turn locking screw (a) anti-clockwise and remove the inner access cover (b). Place it

safely to one side.

Carefully remove the new memory board from its wrapping. Try to handle the board

only by its short edges, avoiding contact with any metal parts as far as possible. In

particular, avoid touching the edge connector.

Summary of Contents for e-studio222cs







































































































































































Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands

Toshiba e-studio222cs, User Manual

Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands