Toshiba e-studio222cs User Manual Download Page 144

Page: 144 / 166

Appendix A - menu system > 144

ASY

SETUP

NOTE
The Easy Setup menu is blocked by the Admin password.

ITEM

OPTION

OPTION/DESCRIPTION

Date/Time Setting

user defined

Using the arrow keys, select your time zone,
in relation to GMT, from the list. Press

continue.

Not Summer
Time
Now Summer
Time

Manual

Day
Month
Year

Using the keypad
and arrow keys,
enter the correct
date and time.

Hour
Minute
Second

Server

Set Address of SNTP
Server (Primary)

user defined

Set SNTP Server
(Secondary)

Fax Setting

Fax Number

user defined

Using the keypad and on screen options,
enter the fax number of this machine.

Sender ID

user defined

Using the arrow keys and on screen
keyboard, enter the sender ID.

Network Setting

Manual
Auto

IP Address

Specifies whether IP address allocation is
automatic (DHCP) or manually assigned.
Display condition: TCP/IP protocol must be
enabled.

Subnet Mask

Current assigned subnet mask.
To change, enter the address using the
keypad. Press

to register new address.

Display condition: TCP/IP protocol must be
enabled.

Default Gateway

Current assigned gateway address.
To change, proceed as above.
Display condition: TCP/IP protocol must be
enabled.

DNS Server
(Primary)

Current assigned DNS server (primary).

DNS Server
(Secondary)

Current assigned DNS server (secondary).

WINS Server
(Primary)

Current assigned WINS server (primary).

WINS Server
(Secondary)

Current assigned WINS server (secondary).

Summary of Contents for e-studio222cs







































































































































































Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands

Toshiba e-studio222cs, User Manual

Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands