Toshiba e-studio222cs User Manual Download Page 35

Page: 35 / 166

User authentication and access control > 35

SER

AUTHENTICATION

AND

ACCESS

CONTROL

If your Administrator has enabled access control on your machine, it will automatically start

up in access control mode. You will not be able to use it until you have provided valid login

information. If the access control setting is:

PIN

; you will need to provide a valid PIN (personal identification number).

User name and password

; you will need to provide a valid user name and

password.

After using it, you will be expected to log out, leaving the machine in access control mode,

unable to be used by unauthorised users.

PIN

AUTHENTICATION

OGGING

INTO

THE

MACHINE

Enter your PIN using the keypad on the control panel.

Press

If authentication succeeds, the top screen displays.

OGGING

OUT

THE

MACHINE

When you have finished operations, be sure to log out of the machine.

Press the

BACK

button or

Left

arrow key until the top screen displays.

Press the

RESET/LOGOUT

button on the control panel.

SER

NAME

AND

PASSWORD

AUTHENTICATION

OGGING

INTO

THE

MACHINE

Make sure that

User Name

is selected and then press the

Right

arrow key.

Enter your name.

Using the arrow keys, highlight

Done

and then press

Make sure that

Password

is selected and then press

Enter your password.

Using the arrow keys, highlight

Done

and then press

At the

screen, press

If authentication succeeds, the top screen displays.

OGGING

OUT

THE

MACHINE

When you have finished operations, be sure to log out of the machine.

Press the

BACK

button or

Left

arrow key until the top screen displays.

Press the

RESET/LOGOUT

button on the control panel.

NOTE
After a certain period of time, the machine automatically logs out users.

Summary of Contents for e-studio222cs







































































































































































Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands

Toshiba e-studio222cs, User Manual

Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands