Toshiba e-studio 2555c Troubleshooting Manual Download

Page: 94 / 136

5 TROUBLESHOOTING FOR e-Filing

92 e-Filing Web Utility Problems

Paste failed. Maximum number of page range is
reached.

Delete unnecessary pages and paste pages in the
document. A document can contain up to 200
pages.

Cut failed. The items have been deleted or modified. Refresh the page and make sure that the item was

deleted or is currently being modified.

Copy failed. The items have been deleted or
modified.

Refresh the page and make sure that the item was
deleted or is currently being modified.

Paste failed. The items have been deleted or
modified.

Refresh the page and make sure that the item was
deleted or is currently being modified.

Delete failed. The items have been deleted or
modified.

Refresh the page and make sure that the item was
deleted or is currently being modified.

Please enter valid password.

Enter the correct password.

A folder with the name you specified already exists.
Please try again.

Use a name that does not exist in the box.

Another user is archiving or uploading. Please try
again later.

The document is being archived or uploaded by
another user. Try again after the other user has
finished.

The Maximum Possible Archive Size exceeded.
Archiving is not Possible.

An archive file larger than 2 GB cannot be created.
Make sure that the archive file will be less than 2 GB
by archiving smaller groups of files instead of a large
one.

The Box cannot be erased. A document contained in
Box is being used.

A document contained in the box is being used by
another user. Try again after the other user has
finished.

The document is being used. Please try again later.

The selected document is being used by another
user. Try again after the other user has finished.

File format doesn’t correspond. Please contact
Administrator.

Contact your administrator to convert the archive file
and try again.

e-Filing is not ready. Please try again later.

e-Filing has not yet been activated. Try again later.

Message

Corrective Action

Summary of Contents for e-studio 2555c








































































































































Search results

Summary of Contents for e-studio 2555c

Reviews:

Related manuals for e-studio 2555c

Brands by name

Popular brands

Toshiba e-studio 2555c, Troubleshooting Manual

Search results

Summary of Contents for e-studio 2555c

Reviews:

Related manuals for e-studio 2555c

Brands by name

Popular brands