![Toro Recycler 22275 Operator'S Manual Download Page 7](http://html.mh-extra.com/html/toro/recycler-22275/recycler-22275_operators-manual_1132141007.webp)
IV. Maintenance and Storage
1.
Stop the machine, remove the electric-start
button, remove the battery pack from the
machine, and wait for all movement to stop
before adjusting, servicing, cleaning, or storing
the machine.
2.
Do not attempt to repair the machine except as
indicated in the instructions. Have an Authorized
Service Dealer perform service on the machine
using identical replacement parts.
3.
Wear gloves and eye protection when servicing
the machine.
4.
Sharpen a dull blade on both ends to maintain
balance. Clean the blade and ensure that it is
balanced.
5.
Replace the blade if it is bent, worn, or cracked.
An unbalanced blade causes vibration, which
could damage the motor or cause personal
injury.
6.
When servicing the blade, be aware that the
blade can still move even though the power
source is off.
7.
Check the grass collection bag frequently for
deterioration or wear, and replace a worn bag
with a Toro [replacement] bag.
8.
For best performance, use only genuine Toro
replacement parts and accessories. Other
replacement parts and accessories could be
dangerous, and such use could void the product
warranty.
9.
Maintain the machine—Keep cutting edges
sharp and clean for the best and safest
performance. Keep handles dry, clean, and free
from oil and grease. Keep guards in place and in
working order. Keep blades sharp. Use identical
replacement blades only.
10.
Check the machine for damaged parts—If there
are damaged guards or other parts, determine
whether the machine will operate properly.
Check for misaligned and binding moving parts,
broken parts, mounting, and any other condition
that may affect its operation. Unless indicated
in the instructions, have an Authorized Service
Dealer repair or replace a damaged guard or
part.
11.
When the battery pack is not in use, keep it
away from metal objects such as paper clips,
coins, keys, nails, and screws that can make a
connection from 1 terminal to another. Shorting
the battery terminals may cause burns or a fire.
12.
Check the blade and motor mounting bolts
frequently for tightness.
13.
When you are not using the machine, store it
indoors in a dry, secure place out of the reach
of children.
14.
CAUTION—A mistreated battery pack may
present a risk of fire or chemical burn. Do not
disassemble the battery pack. Do not heat the
battery pack above 68°C (154°F) or incinerate
it. Replace the battery pack with a genuine Toro
battery pack only; using another type of battery
pack may cause a fire or explosion. Keep
battery packs out of the reach of children and
in the original packaging until you are ready to
use them.
15.
Do not dispose of the battery in a fire. The
cell may explode. Check with local codes for
possible special disposal instructions.
SAVE THESE
INSTRUCTIONS
5
Summary of Contents for Recycler 22275
