Toro 00075SL, Service Manual

Page: 28 / 290

Reelmaster 5500-D
Page 3 - 12
Kubota Diesel Engine
Fuel System
Figure 18
1. Fuel filter
2. Barbed fitting
3. Fuel fitting
4. Hose clamp
5. Fuel hose
6. Gasket
7. Sending
unit
8. Lock washer
9. Round head screw
10. Fuel hose
11. Hose clamp
12. Fuel hose
13. Fuel fitting (straight)
14. Fuel fitting (straight)
15. Fuel fitting (tee)
16. Fuel hose
17. Fuel hose
18. Stand pipe
19. Fuel elbow connector
20. Grommet
21. Tank cap
22. Fuel tank
23. Grommet
24. Flat washer 25. Cap screw
26. Drain clamp
27. Drain fitting
28. Fuel hose
29. Cable tie
30. Grommet
31. Cap screw
32. Flat washer
33. Spring clamp
34. Spring clamp
35. Frame
19
8
35
13 12
18
15
14
17
9
10
6
16 2
7
21
22
26
27
34
11
24
23
25
29
33 4
30
31
5
11
3
32
3
11
17
28
1
20
35
Never Seez
30 to 60 in−lb
(3.4 to 6.8 N−m)
DANGER
Because diesel fuel is highly flammable, use cau-
tion when storing or handling it. Do not smoke
while filling the fuel tank. Do not fill fuel tank
while engine is running, hot, or when machine is
in an enclosed area. Always fill fuel tank outside
and wipe up any spilled diesel fuel before start-
ing the engine. Store fuel in a clean, safety-ap-
proved container and keep cap in place. Use die-
sel fuel for the engine only; not for any other pur-
pose.
Check Fuel Lines and Connections
Check fuel lines and connections periodically as recom-
mended in the maintenance schedules in Chapter 2 -
Product Records.
1. Park machine on a level surface, lower cutting units,
stop engine, engage parking brake, and remove key
from the ignition switch.
2. Check lines for deterioration, damage, leaking, or
loose connections. Replace hoses, clamps, and con-
nections as necessary.