![background image](http://html1.mh-extra.com/html/tiger/370-cnc-mr/370-cnc-mr_use-and-maintenance-manual_1115081054.webp)
5--19
44
"
If the size is not correct, use the BLADE THICKNESS parameter to enter
the correction value. Repeat the cut with the check cycle activated. In this ca-
se the machine will perform the following operations:
--- START
--- BAR SUPPLY
--- CUT IN AUTOMATIC MODE
--- STOP.
In other words, the machine starts again where it had stopped, automatically
changing the size with the set adjustment, and supplying the bar with the new
measure. Check the size again, and if it is correct, press F6 to delete STEP,
then press START.
F0 = PGR. SINGLE
F9 = MAIN MENU
F8 = BLADE THICKNESS
F7 = SING/CONT CYCLE
F6 = EXEC. STEP/CONT
MEASUR.
AUTOMATIC
OPERATING CYCLE
X =
θ
°
=
W =
F = 153
S =
kg=
10
DL=
0
SL=
3
AM=
0.0
A =
0.1
T =
0: 0
TT=
0:10
CUTS
EXEC.
θ
CUTS
PROG.
SINGLE PROGRAM
RUN/PROG=PROGRAMMING
PGR. NO
CUTS PROG.
0
905,7
2343
FCTI
"
Select the cutting speed.
"
Select the fluid for automatic operation by pressing the specific button. The
button led will light up.
"
Set the head descent speed regulator to 0 to prevent inadvertent movement of
the cutting head, once the cycle starts.
Cutting
"
Enable motor rotation by activating the blade motor selector on the control
console;
"
start operation.
Now the blade starts, the cutting cylinder is under pressure and the lubricant/
coolant supply starts. At this stage it is possible to adjust, according to the type of
material, the 3 parameters which influence the cut: the disk rotation speed and
the head downstroke speed, through the relative potentiometers on the control
panel.
Summary of Contents for 370 CNC--MR
