Tiger 370 CNC--MR, Use And Maintenance Manual

Page: 138 / 180

MEP S.p.A.
7--6 128
Use and maintenance manual TIGER 370 CNC--MR
Set minimum blade tension threshold
"
Press F6 to enter SET UP for cutting vice opening/closure timings, rotating
tower lock and unlock, start and stop chip suction device, LCD lighting dura-
tion.
VICE OPENING/CLOSURE = 4.5S
ROTATING TOWER LOCK/UNLOCK = 3.0S
ON TIME CHIP SUCTION DEVICE = 1 M
OFF TIME CHIP SUCTION DEVICE = 5 M
LCD LIGHTING DURATION = 3 M
(0 = INFINITE)
"
To change the pre---set values, input the timings in seconds for the first two
and in the minutes for the other three.
"
Press RUN/PROG to return to PREVIOUS MENU.
Optional settings
"
Press F7 to enter optional settings SET UP.
RUN/PROG = PREVIOUS MENU
INVERTER = YES
1ª SPEED = NO
ROTATING TOWER = NO
MOTOR DRIVEN ROTATING TOWER = NO
MOTOR DRIVEN BLADE GUIDE HEAD= NO
MOTOR DRIVEN BLADE TENSIONER = NO
(0 =NO =ABSENT, 1 =YES =PRESENT)
"
Press 0 or key 1 to enable or disable each optional, press ENTER to go to the
next up to the second visualised screen.
RUN/PROG = PREVIOUS MENU
DEVIATION CONTROL. BLADE = NO
PIECE UNLOAD ROBOT = NO
MEP BAR MAGAZINE = YES
GUEST BAR MAGAZINE = NO
(0 =NO =ABSENT, 1 =YES =PRESENT)
"
Press RUN/PROG to return to PREVIOUS MENU.Press RUN/PROG to
return to PREVIOUS MENU.