Tiger 370 CNC--MR, Use And Maintenance Manual

Page: 153 / 180

8--3 143 Maintenance and choice of consumables
Monthly
This section lists the operations to be carried out for the monthly maintenance of
the machine.
"
clean thoroughly the water tank and the electric pump filter;
Maintenance of working parts
During maintenance work on the TIGER 370 CNC---MR , special attention should
be paid to operating units such as the transmission box.
Transmission box
After 100 work hours, empty the drive box using the following procedure:
"
remove the outlet plug, collect oil in a container for used oils; to speed up the
operation remove the inlet plug positioned on the top of the head;
"
once the operation is complete, replace the outlet plug and fill with AGIP
BLASIA 460 oil, or equivalent, up to the point indicated by the level plug po-
sitioned on the right---hand side of the head;
"
after every 2000 working hours repeat the oil change operation.