Tiger 370 CNC--MR, Use And Maintenance Manual

Page: 134 / 180

MEP S.p.A.
7--2 124
Use and maintenance manual TIGER 370 CNC--MR
Set parameter for machine type
"
Press F2 to enter SET UP, select machine type, select relative number and
press ENTER to confirm.
SELECT MACHINE TYPE
CONDOR 90 CNC FE
RUN/PROG = PREVIOUS MENU
1 = SHARK 320 CNC FE
2 = SHARK 330 CNC FE
3 = SHARK 330 CNC FE-S
4 = SHARK 400 CNC FE-S
5 = SHARK 270 CNC FE
6 = TIGER 370 CNC FE-LR
7 = COBRA 350 CNC FE
8 = CONDOR 90 CNC FE-LR
9 = CONDOR 90 CNC FE-MR
10= CONDOR 90 CNC FE-HR
"
Press RUN/PROG to return to PREVIOUS MENU.
Set parameter for step motor
"
Press F3 to enter step motor SET UP.
STEP MOTOR
RUN/PROG PREVIOUS MENU
MEASURE UNIT = mm
SCREW STEP = 10
MAX QUOTA = 1005.5
ABOVE ZERO = 5.0
REV. STEPS = 400
ACCELERATION = 16
HEAD CYL.BREAKDOWN.ZERO SET =
1000
HEAD CYL.BREAKDOWN.ABOVE
ZERO=00000
HEAD CYL.BREAKDOWN.MANUAL =
2000
HEAD CYL.BREAKDOWN.MAX.FOR-
WARD=6000
HEAD CYL.BREAKDOWN.MAX RE-
VERSE=6000
"
Set parameters highlighted on display and press ENTER each time to confirm
and change subject; use numerical keys to set numerical values and press F1
or F2 to set unit measures such as mm or inches.
"
Press RUN/PROG. to return to PREVIOUS MENU. Or press ENTER, to
enter second SET UP step motor dislpay.
STEP MOTOR
RUN/PROG = PREVIOUS MENU
TAB.CORRECT.SCREW STEP ERROR
QUOTA CORRECTION
0.0
±
0.0
1º REF. NODE: 5.1
±
0.0
2º REF. NODE: 5.2
±
0.0
3º REF. NODE: 5.3
±
0.0
1005.5
±
0.0
"
We can now correct the measurement error of the fed material. This adjust-
ment is to be carried out when the cut is longer or shorter than the value indi-
cated by the machine. By increasing the screw step correction value (diplayed