Tiger 370 CNC--MR, Use And Maintenance Manual

Page: 51 / 180

MEP S.p.A.
5--16 41
Use and maintenance manual TIGER 370 CNC--MR
gramme in use will appear in the first square: SINGLE PGR. To begin pro-
gramming, press RUN/PROG.
F0 = PGR. SINGLE
F9 = MAIN MENU
F8 = BLADE THICKNESS
F7 = SING/CONT CYCLE
F6 = EXEC. STEP/CONT
MEASUR.
AUTOMATIC
OPERATING CYCLE
X =
θ
°
=
W =
F = 153
S =
kg=
10
DL= 0
SL= 3
AM= 0.0
A = 0.1
T = 0: 0
TT= 0:10
CUTS
EXEC.
θ
CUTS
PROG.
SINGLE PROGRAM
RUN/PROG=PROGRAMMING
PGR. NO CUTS PROG.
0 512,8 2343
FCTI
"
When the RUN/PROG button has been pressed, the measurements will be
reversed, indicating that they can be changed. To set new measurements, key
in using the NUMERIC KEYS. Enter the measurement 905,7 (for example).
To do so the following keys must be pressed: “9” “0” “5” “.” “7”
F0 = PGR. SINGLE
F9 = MAIN MENU
F8 = BLADE THICKNESS
F7 = SING/CONT CYCLE
F6 = EXEC. STEP/CONT
MEASUR.
AUTOMATIC
OPERATING CYCLE
X =
θ
°
=
W =
F = 153
S =
kg=
10
DL= 0
SL= 3
AM= 0.0
A = 0.1
T = 0: 0
TT= 0:10
CUTS
EXEC.
θ CUTS
PROG.
SINGLE PROGRAM
RUN/PROG=PROGRAMMING
PGR. NO CUTS PROG.
0 905,7 2343
FCTI
"
Pressing the numeric keys, the numbers are displayed from right to left. If you
make a mistake when writing the measure, press CLEAR to delete the value;
0.0. will appear. After entering the measure, press ENTER. With this opera-
tion you will obtain two results:
1) the new value is memorized;
2) the reverse moves to PROG. CUTS to set the desired number of cuts.
F0 = PGR. SINGLE
F9 = MAIN MENU
F8 = BLADE THICKNESS
F7 = SING/CONT CYCLE
F6 = EXEC. STEP/CONT
MEASUR.
AUTOMATIC
OPERATING CYCLE
X =
θ
°
=
W =
F = 153
S =
kg=
10
DL= 0
SL= 3
AM= 0.0
A = 0.1
T = 0: 0
TT= 0:10
CUTS
EXEC.
θ CUTS
PROG.
SINGLE PROGRAM
RUN/PROG=PROGRAMMING
PGR. NO CUTS PROG.
0 905,7 2343
FCTI
"
With the reverse on PROG. CUTS, set the number of cuts to be executed
using the numeric keys as for the previous operation. Digit 100, pressing in
order buttons “1” “0” “0”; then press ENTER again. With this operation you
will obtain two results: