10--9
163
Troubleshooting
EMERGENCY
EMERGENCY STOP BUTTON
PRESSED
PRESS RESET
This message is displayed if an operation is activated before releasing the HEAD
EMERGENCY STOP button.
"
Release the emergency stop button and press RESET to return to manual com-
mand control.
EMERGENCY
FEED BAR JAMMED
PRESS RESET
The causes of this problem could be of mechanical, electrical or electronic nature.
"
Press RESET to return to manual command control
EMERGENCY
INVERTER FAILURE
PRESS RESET
This message is always on line when the system is in use.
"
Press RESET, to restore manual command control.
EMERGENCY
HEAD JAMMED
PRESS RESET
This message is always on line when the system is in use.
"
Press RESET, to restore manual command control.
EMERGENCY
FEED REQUESTED WITH
FCTI ERROR
PRESS RESET
This message may appear during automatic cycle when the head returns to FCTI
position and then loses its positioning.
"
Press RESET to restore manual command control.
EMERGENCY
DRIVER MPP AXISX IN
BLOCO
PRESS RESET
This messages derives from an anomaly in AXIS X control and may be due to over-
heating or electronic breakdown.
"
Press RESET to restore manual command control.
EMERGENCY
BAR IN CUTTING VICE
ABSENT
PRESS RESET
This message is displayed when no material has been loaded in the cutting vice or
when the cutting vice hasn’t been manually positioned at a distance of 2÷3 mm
before being automatically closed
"
Press RESET to restore manual command control.
Summary of Contents for 370 CNC--MR
