Tiger 370 CNC--MR, Use And Maintenance Manual

Page: 45 / 180

MEP S.p.A.
5--10 35
Use and maintenance manual TIGER 370 CNC--MR
"
Keep the button pressed until the disk is at 5/10 mm from the material to be
cut.
"
Memorize the FCTI (Head Upstroke Limit) by pressing the specific button;
"
after pressing the FCTA memorizing button, the display will indicate that it
has been memorized.
SEMI-AUTOMATIC
X =
θ
°
=
W =
F = 153
S =
kg=
10
DL= 0
SL= 3
AM= 0.0
A = 0.1
T = 0: 0
TT= 0:10
CURRENT CYCLE
F9 = MAIN MENU
F5 = RESET TT
FCTI
"
The FCTI (Head Downstroke Limit) will be restored at the end of the cut.
Preparing to cut
"
Select the fluid for automatic operation by pressing the specific button. The
led of the relative button will light up.
"
Adjust the head descent speed potentiometer to 0 to avoid undesirable start-
ing speeds.
Cutting
"
Close the protection and press the reset button;
"
Enable motor rotation by activating the blade motor selector on the control
console;