Tiger 370 CNC--MR, Use And Maintenance Manual

Page: 55 / 180

MEP S.p.A.
5--20 45
Use and maintenance manual TIGER 370 CNC--MR
In this phase, pressing the head dowstroke button, the FCTA spot is deleted.
"
When the machine arrives at the end of the cut it is necessary to memorize
the FCTA position, by pressing the relative button;
"
once the FCTA memorising button has been pressed, the display will show the
symbol confirming memorisation.
F0 = PGR. SINGLE
F9 = MAIN MENU
F8 = BLADE THICKNESS
F7 = SING/CONT CYCLE
F6 = EXEC. STEP/CONT
MEASUR.
AUTOMATIC
OPERATING CYCLE
X =
θ
°
=
W =
F = 153
S =
kg=
10
DL= 0
SL= 3
AM= 0.0
A = 0.1
T = 0: 0
TT= 0:10
CUTS
EXEC.
θ CUTS
PROG.
SINGLE PROGRAM
RUN/PROG=PROGRAMMING
PGR. NO CUTS PROG.
0 905,7 2343
FCTI
"
Then the machine will bring the head to the FCTI spot, and will deliver the
material to execute another cut in the set mode: step or continuous.
Every time the machine finishes a cut the number of CUTS EXEC. is updated
by one unit. The initial cut, and the cuts executed after an emergency, are not
counted.
"
The machine can stop in two ways, when in automatic mode: BAR FIN-
ISHED or CUTS FINISHED in both cases, all that is required to exit these
situations is to press the RESET button, following which the machine will
again be ready to begin a new cutting programme, or cutting a new bar. In
both cases a clear message will be displayed.
CUT FINISHED
BAR FINISHED
PRESS RESET PRESS RESET
N.B.
N.B.