![background image](http://html1.mh-extra.com/html/tiger/370-cnc-mr/370-cnc-mr_use-and-maintenance-manual_1115081135.webp)
7--3
125
Adjustments
on the right) we can compensate for any errors due to wearing of the screw in
the following way:
"
the cursor is automatically positioned on the first node, set the required quota
and press ENTER;
STEP MOTOR
RUN/PROG = PREVIOUS MENU
TAB.CORRECT.SCREW STEP ERROR
QUOTA CORRECTION
0.0
±
0.0
1º REF. NODE:
5.1
±
0.0
2º REF. NODE:
5.2
±
0.0
3º REF. NODE:
5.3
±
0.0
1005.5
±
0.0
"
the cursor then moves to the corretion value: if the actual piece measurement
is lower, press
and add the difference; if the measurement is higher,
press
to subtract the correction value;
STEP MOTOR
TAB.CORRECT.SCREW STEP ERROR
QUOTA CORRECTION
0.0
±
0.0
1º REF. NODE:
5.1
±
0.0
2º REF. NODE:
5.2
±
0.0
3º REF. NODE:
5.3
±
0.0
1005.5
±
0.0
"
proceed in the same way for the other nodes. The machine automatically as-
sumes the value of the last node and therefore the correction value must be
added.
The machine may have the STEP---MOTOR screw at 5 or 10mm steps. To
change the SCREW STEP which is set in the above screen at 5 mm (full step)
with REV. STEP = 200, both the SET---UP screen and the STEP---MOTOR
driver must be configured.
"
For this adjustment, the machine must be on: identify the STEP MOTOR
driver in the electric cabinet.
"
The dip switches at the top are used for the configuration;
Summary of Contents for 370 CNC--MR
