Tiger 370 CNC--MR, Use And Maintenance Manual

Page: 154 / 180

MEP S.p.A.
8--4 144
Use and maintenance manual TIGER 370 CNC--MR
Consumable materials
It is essential to use specific oils for the pneumatic and lubricant/coolant circuits.
The oils suitable for each of these circuits are listed below.
Oils for transmission box
The machine is supplied with AGIP BLASIA 460 oil, ISO and UNI symbol
CC460. However the following oils can be regarded as compatible or with
equivalent characteristics:
SHELL OMALA 460
Transmission box:
--- capacity Kg. 10
Oils for lubrication/coolant liquid
The oil used for the lubrication/coolant fluid in the machine is CASTROL
Syntolin TFX. Though there are no specific standards for these types of oils,
MEP considers that CASTROL Syntolin
TFX is the best product available with regard to quality:price ratio. Nevertheless,
the following oils of similar characteristics can be said to be compatible:
AGIP NB 200 --- SHELL Lutem TT --- IP Utens Fluid---F
Finally, one particular blade manufacturer (LENOX) recommends and supplies a
coolant under the name of LENOX BAND---ADE SAWING FLUID.
Coolant tank:
--- tank capacity
50
50 litres
--- oil concentration 5---6%
Oils for spray mist system (optional)
The used oil type for the optional spray mist system is BLASER Vascomill 22.
The following oils can also be said to have similar characteristics and are
therefore compatible:
UNIST Coolube 2210 --- FUCHS Plantocut Micro Plus 27
--- tank capacity Lt. 1