![background image](http://html1.mh-extra.com/html/tiger/370-cnc-mr/370-cnc-mr_use-and-maintenance-manual_1115081027.webp)
MEP S.p.A.
3--8
17
Use and maintenance manual
TIGER 370 CNC--MR
CONDUCTED EMISSIONS
Gate A
Freq. (MHz)
Q---peak limit (dBuV)
Mean value limit (dBuV)
Result
A.C. power supply
input
0.15 --- 0.5
0.5 --- 5
5 --- 30
79 --- 73
(linear reduction with
log of frequency)
73
73
66 --- 60
(linear reduction with log of fre-
quency)
60
60
Complies
CONDUCTED EMISSIONS --- ANALYSIS OF INTERMITTENT DISTURBANCES
Gate
Result
A.C. power supply input
Not applicable
IRRADIATED EMISSIONS
Gate
Freq. (MHz)
Q---peak limit (10 m)
(dBuV/m)
Result
Enclosure
30 --- 230
230 --- 1000
40
47
Complies
Immunity
H
CEI EN 61000--6--2 (2000) Electromagnetic Compatibility (EMC) -- Generic stan-
dard on immunity. Part 6--2: Industrial Environment.
H
EN 61000--4--2 + A1 (1996--1999) Electromagnetic Compatibility (EMC) -- Part 4:
Test and measurement techniques -- Section 2: Electrostatic discharge immunity
tests -- Basic publication.
H
EN 61000--4--3 Electromagnetic Compatibility (EMC) -- Part 4: Test and measure-
ment techniques -- Section 3: Radiated, radio-- frequency, electromagnetic field im-
munity test.
H
EN 61000--4--4 (1996) Electromagnetic Compatibility (EMC) -- Part 4: Test and
measurement techniques -- Section 4: Fast transients/bursts immunity tests -- Basic
publication.
H
EN 61000--4--5 (1997) Electromagnetic Compatibility (EMC) -- Part 4: Test and
measurement techniques -- Section 5: Surge immunity test.
H
EN 61000--4--6 (1995) Electromagnetic Compatibility (EMC) -- Part 4: Test and
measurement techniques -- Section 6: Immunity to conducted interference, induced
by radio frequency fields.
H
EN 61000--4--11 (1977) Electromagnetic Compatibility (EMC) -- Part 4: Test and
measurement techniques -- Section 11: Voltage dips, short interruptions and voltage
variations immunity tests.
IMMUNITY TO ELECTROSTATIC DISCHARGES
Gate
Test levels
Evaluation criterion
Result
Enclosure
contact 4 kV
steel plate 4 kV
in air 8 kV
B
Complies
IMMUNITY TO VOLTAGE (BURSTS)
Gate
Test levels
Evaluation criterion
Result
A.C. power supply in-
put
2 kV
B
Complies
IMMUNITY TO CONDUCTED ELECTROMAGNETIC FIELDS
Gate
Test levels
Evaluation criterion
Result
A.C. power supply in-
put
10V
A
Complies
IMMUNITY TO IRRADIATED ELECTROMAGNETIC FIELDS
Gate
Test levels
Evaluation criterion
Result
Enclosure
10 V/m
A
Complies
Summary of Contents for 370 CNC--MR
