Tiger 370 CNC--MR, Use And Maintenance Manual

Page: 66 / 180

5--31 56
L1 L2 L3 L4
P1
P2
P3
Ltot = L1 + L2 + L3 + L4
"
Prepare for cutting as if for an automatic cycle (see the instructions in the
relevant paragraph).
"
Set cutting parameters as indicated in the automatic cycle paragraph, for pro-
gramme data and technological machine control parameters.
"
By pressing run/prog. programming is accessed. Press the F1 button, to pro-
gramme cuts.
"
Key in the values for each field and confirm each piece of data input by press-
ing ENTER.
PROGRAMMING CUTS
1
100
1 PROGRAMME Nº=
MEASUREMENT=
Nº OF CUTS =
θ
° CUT =
WIDTH =
0
°
0’
45.5
"
When ENTER is pressed again, the screen for the second LOOP programme
appears. Proceed to input the data for further programmes. When completed,
press RUN/PROG. Press the F3 key on the programming screen, which re-
lates to LOOP PROGRAMME SELECTION.
PROGRAMMING CUTS
1
100
2
PROGRAMME Nº=
MEASUREMENT=
Nº OF CUTS =
θ
° CUT =
WIDTH =
0
°
0’
45.5