Tiger 370 CNC--MR, Use And Maintenance Manual

Page: 137 / 180

7--5 127 Adjustments
"
Press RUN/PROG to return to PREVIOUS MENU.
The “MAX. UPSTROKE SPEED” parameter must be 2000 when the machine
is connected to the bar store.
Setting blade characteristics, head downstroke speed and bar initializing
These parameters are accessed by pressing F8 on the work video pages of the
automatic cycle.
AUTOMATIC
X =
θ
°
=
W =
F = 153
S =
kg=
10
DL= 0
SL= 3
AM= 0.0
A = 0.1
T = 0: 0
TT= 0:10
F0 = PGR. SINGLE
F9 = MAIN MENU
F8 = BLADE THICKNESS
F7 = SING/CONT CYCLE
F6 = EXEC. STEP/CONT
CUTS
EXEC.
θ CUTS
PROG.
SINGLE CYCLE
RUN/PROG=PROGRAMMING
PGR. NO MEASUR. CUTS PROG.
10 905,7 2343
OPERATING CYCLE
"
Press F8 to display the SET UP in order to set: the blade thickness expressed
in millimeters, the programmed and residual life of the tool, the maximum
current of the blade motor, the opening speed of the cutting head downstroke
valve, the size of the bar initialization.
RUN/PROG = PREVIOUS MENU
BLADE THICKNESS = 2.5
BLADE LIFE
RESIDUAL = 0 m
PROGRAMMED = 0 m
MAXIMUM BLADE MOTOR CURRENT
HARE 2ND SPEED AMP. = 19.9
MOTOR RAMP TIME CPT = 1
"
To enter data, move and confirm by pressing ENTER.
"
Press RUN/PROG to return to PREVIOUS MENU.
Blade motor and supply unit setting
The Blade Motor Stop parameter can be used to stop the blade in the FCTA
(Head Forward Travel Limit) position, the FCTI (Head Back Travel Limit)
position, or in no position at all. The Park Feeder parameter is used to stop the
feeder carriage forward (near the cutting vice) or back (as during normal machine
operation).
"
From the SET UP menu press F4 to change:
RUN/PROG = PREVIOUS MENU
BLADE MOTOR STOP = 2
(0 = FCTA, 1 = FCTI, 2 = NEVER)
SUPPLY UNIT STOP = 1
(0 = DOWN, 1 = UP)
"
to enter data, move and confirm by pressing ENTER.
"
Press RUN/PROG to return to PREVIOUS MENU.
N.B.