Tiger 370 CNC--MR, Use And Maintenance Manual

Page: 22 / 180

3--3 12 Safety and accident prevention
mm. 1500 mm. 1500
FEED ROLLER TABLE
DISCHARGE ROLLER TA-
BLE
Any maintenance work on the hydraulic or pneumatic systems must be
carried out only after the pressure in the system has been released.
The operator MUST NOT perform any risky operations or those not
required for the machining in course (e.g. remove swarf or metal shavings
form the machine while cutting).
Remove equipment, tools or any other objects from the cutting zone; al-
ways keep the working area as clean as possible.
Do not use the machine for cutting pieces which exceed the cutting ca-
pacity described in the technical specifications or are less than 5 mm
Before starting any cutting operations, ensure that the workpiece is se-
curely held in the vice and the machine has been set correctly. A number
of examples of how to clamp the different profiles correctly in our ma-
chines are shown below.
Never move the machine while it is cutting.
Do not use blades of different sizes to those recommended in the ma-
chine’s specifications.
When cutting very short pieces, make sure that they are not dragged be-
hind the support shoulder, where they could jam in the blade.