Tiger 370 CNC--MR, Use And Maintenance Manual

Page: 78 / 180

6--11 68 Diagrams, exploded views and replace--
2. wires list (list of all wires) with the following information:
n
in---house article code;
n
identification code;
n
description;
n
section of wire (mm2);
n
colour of wire;
n
start: indicates the component (identification code and contact number)
at which the wire starts;
n
end: indicates the component (identification code and contact number) at
which the wire ends; e.g.
CODE CABLE DESCRIPTION SECTION NO. COLOUR START END
022.0141 --W7 RESET+EMER-
GENZA
0.50 317 BIANCO --S3 4 --K10 14
In this example, wire no. 317 white, identified as ---W7, starts from contact no. 4
on component ---S3, and ends at contact no. 14 on component ---K10.
Enclosed below is Appendix D2 to European Standard EN 60204---1
D2--Letter codes used to designate the type of component
LETTER TYPE OF COMPONENT EXAMPLES IDENTIFICATION OF
THE APPLIANCE
A Complex units Laser
Maser
Regulator
A
B
Transducers converting a non
electrical signal to an electrical
signal and vice versa
Transistor amplifier
IC amplifier
Magnetic amplifier
Valve amplifier
Printed circuit board
Drawer
Rack
AD
AJ
AM
AV
AP
AT
AR
C Capacitors C
D
Binary operators, timing devices,
storage devices
Digital integrated circuits and
devices:
Delay line
Bistable element
Monostable element
Recorder
Magnetic memory
Tape or disk recorder
D
E
Various materials Devices not specified in this
table
E
F Protective Devices Lightning protectors
Arrestors
F
Instant action current thresh-
old protector
Delayed action current thresh-
old protector
Instant and delayed action cur-
rent threshold protector
Fuse
Voltage threshold protector
FA
FR
FS
FU
FV