Tiger 370 CNC--MR, Use And Maintenance Manual

Page: 52 / 180

5--17 42
1) the new value is memorized;
2) the reverse moves to NR PGR.
F0 = PGR. SINGLE
F9 = MAIN MENU
F8 = BLADE THICKNESS
F7 = SING/CONT CYCLE
F6 = EXEC. STEP/CONT
MEASUR.
AUTOMATIC
OPERATING CYCLE
X =
θ
°
=
W =
F = 153
S =
kg=
10
DL= 0
SL= 3
AM= 0.0
A = 0.1
T = 0: 0
TT= 0:10
CUTS
EXEC.
θ CUTS
PROG.
SINGLE PROGRAM
RUN/PROG=PROGRAMMING
PGR. NO CUTS PROG.
0 905,7 2343
FCTI
"
End of programming. Press RUN/PGR to return to execution.
Whenever CLEAR is pressed in the single program automatic mode, when the
machine is stopped, the count of the cuts executed previously is reset.
"
After pressing RUN/PGR, the reverse will disappear from the display; this
indicates that the machine is ready for operation. To confirm the new pro-
gram, press CLEAR; this will produce two results:
1) confirmation of the program to be executed
2) count reset of cuts executed previously.
F0 = PGR. SINGLE
F9 = MAIN MENU
F8 = BLADE THICKNESS
F7 = SING/CONT CYCLE
F6 = EXEC. STEP/CONT
MEASUR.
AUTOMATIC
OPERATING CYCLE
X =
θ
°
=
W =
F = 153
S =
kg=
10
DL= 0
SL= 3
AM= 0.0
A = 0.1
T = 0: 0
TT= 0:10
CUTS
EXEC.
θ CUTS
PROG.
SINGLE PROGRAM
RUN/PROG=PROGRAMMING
PGR. NO CUTS PROG.
0 905,7 2343
FCTI
"
Enter the value BLADE THICKNESS which must be programmed every ti-
me the tool is changed. It is necessary to add also the blade thisckness to the
cutting measure, because the bar supply system works when the carriage is at
zero, i.e. after being cut, the piece is on the right of the blade, and this value
is subtracted from the total length of the finished piece. Press F8 to enter this
value.
RUN/PROG = PREVIOUS MENU
BLADE THICKNESS = 3
RESIDUAL
PROGRAMMED = 1547 m
BLADE LIFE = 952 m
MAXIMUM BLADE MOTOR CURRENT
TORTOISE 1ST SPEED AMP. = 12.5
SPEED HEAD AP MPP = 1
BAR INITIALIZING SIZE = 170
N.B.