Section 18:
Tool
Box
Operation
T
ieline
T E C H N O L O G Y
Page 164
3.
Simply click on the
Disconnect
logo to
disconnect
Tool
Box
from the
codec.
If you have connected to a PC and are ready to dial using a manual default
profile, please see the Quick Start section in this manual for the startup
procedure for these profiles. If you are using custom designed profiles or are
having trouble dialing the remote codec, please see the Operation of your
Codec section within this manual.
18.9.1.
ToolBox Connection Error Messages
If the following error messages appear you will need to download the
appropriate RPTP firmware version or the appropriate RPTP
Tool
Box
version so that they match.
Figure 37: ToolBox RPTP Error Message
In the previous example, the RPTP versions of both the codec firmware and
Tool
Box
are displayed to enable you to easily determine which RPTP version
of software you will need to download.
In the next example, an older version of
Tool
Box
without an RPTP version is
installed on the PC. You will need to check the software support page on our
website at http://www.tieline.com/support/software.html to determine what
version of codec firmware will work with your version of
Tool
Box.
Alternatively, you can download a newer version of
Tool
Box
to match the
codec software you have installed.
‘
Disconnect
’ link
logo
