Section 39: Portable Powering Solutions
T
ieline
T E C H N O L O G Y
Page 337
WARNINGS ON BATTERY USE AND CHARGING
1.
Do not wire the charger directly to the battery.
2.
Do not connect your mouse charger to a voltage source greater than 12 volts. 24
volt sources are not acceptable. Correct connection is the responsibility of the
user.
3.
Do not charge the battery module for more that 12 hours.
39.2.
The 12 volt Vehicle Power Supply Cable
T
ieline
can also supply a tailor-made 12 volt cable for connecting your codec
directly to your 12 volt in-vehicle cigarette lighter. This is the perfect solution
when you are broadcasting with your codec for long periods in remote locations.
When you connect to a vehicle
battery please ensure that the
voltage source is 12 volts.
Connecting in this manner will
provide up to 10 hours of
powering to the codec from a fully
charged 12 volt battery in good
condition.
WARNING ON USE OF THE 12 VOLT VEHICLE POWER
SUPPLY CABLE
1.
Do not wire the codec directly to the battery.
2.
Only connect your codec to a 12 volt cigarette lighter socket in your vehicle.
3.
We do not recommend that you connect and broadcast while the engine of
the vehicle is running. Connecting with the engine of the vehicle running may
interfere with the performance of your codec or your mobile connection.
4.
We take no responsibility for unforeseen damage to a vehicle’s battery.
