Section 24: GSM LL/GSM/USB-3G Tab
T
ieline
Page 238
T E C H N O L O G Y
possible at the codec using the POTS landline connection and attempt to
connect.
24.7.
Manual Default GSM Landline Algorithm
The
Man Dflt GSM LL Algorithm
setting in this menu relates to all manual
default profiles within
Tool
Box.
The algorithm setting you choose here will relate
to any GSM
Manual Default Profile
connections.
Important Algorithm Selection Information
The manual default profile algorithm settings in the
POTS, GSM LL/GSM/USB-
3G
, and
ISDN
menus of the
Tool
Box
Profile Editor
, select which algorithm will
be the default for manual default profiles using these connections. For example, if
Music
is selected in the
Man Dflt Algorithm
setting in the
POTS
menu, all manual
default profiles connecting via a POTS connection will use the
Music
algorithm.
This can be overridden in two ways. If you are using the
Connection Setup
(Advanced)
menu to set your connections, you will note that a
Connection Typ
e’s
Algorithm
setting can be changed. If
Any
is the selected algorithm, the algorithm
for each
Connection Type
will be the one selected for manual default profiles, i.e.
the default ones selected in the
POTS, GSM LL/GSM
, and
ISDN
menus. Any
other algorithm selections here will override default algorithm settings in the
POTS, GSM LL/GSM/USB-3G
, and
ISDN
menus.
Secondly, you can reset the algorithm using the codec itself by accessing the
algorithm selections in the
G
3
codec menus.
24.8.
GSM/USB-3G Module/Cellphone Setup: Select GSM
Interface (for a codec connecting with a GSM connection)
This drop-down menu allows a user to select between
different module and connection combinations in a
codec. The options are as follows:
Setting
Module Types Supported
GSM/USB-3G
Settings A
Supports the use of either a GSM or USB-3G module
only.
GSM/USB-3G
Settings B
Supports the use of either a USB-3G Module or external
cell-phone, with a GSM module.
To select the most appropriate connection scenario for your situation, simply
click on the right-hand blue arrow, highlight the desired setting and click on it to
select it.
