Section 21: Profile Editor
T
ieline
T E C H N O L O G Y
Page 188
21.9.
Manual Default Mono/IFB
This profile uses the same
Manual Default Program B
matrix as the previous
profile for routing program signals. In addition it allows IFB communications.
The following image displays the IFB settings for this profile when viewing the
default
Cue/Comms
and
Phone Cue
matrices.
Figure 52: Manual Default Mono/IFB Matrix Settings
The
Cue/Comms
matrix settings are set for
Inputs 1-4
to be sent to
Encoder 2
and to the right side of the headphone outputs. This would be an ideal setup for
commentator’s microphones which can send talkback via
Encoder 2
and at the
same time monitor each commentator’s talkback in the headphones.
Input 5
is being sent to the right side of
HP 1
but not to the
Encoder
so
Cue/Comms
on this input can be used as a cue or pre-fade listen for a program
audio source such as music or sound effects. The
Phone Aux
input can be
monitored pre-fade in the same way via
HP 1R
, with
Phone Out
audio being sent
from the
Input 1
audio source.
Via
Decoder 1
, the incoming IFB feed is being monitored in the left side of each
HP
output and is also being sent to
CH 2 Out
. All audio inputs are being
monitored via
PPM 2
.
