Section 5: Controls and Connections for the I-Mix G3
T
ieline
Page 27
T E C H N O L O G Y
HEADPHONE OUTPUTS.
Industry Standard RTS connectors.
Programmable with
Tool
Box
software.
Each headphone can be assigned to an
input. i.e.
HEADPHONE 1
assigned to
MIC/LINE
in
1
.
POTS
RJ 11 Plain Old
Telephone System
connection and RJ 11
telephone coupler
handset connection.
Line 1- POTS Codec
Line 2- Phone Coupler
Figure 2: Rear Panel Detail of the i-Mix G3Rear Panel Detail of the Tieline I-Mix G3
POWER SUPPLY
12 Volt power carried on
industry standard XLR4
connector.
INPUT CONNECTORS
The codec has 5 inputs that will
handle inputs from -72 dB to -18
dBm. The
MIC/LINE
inputs have
an associated headphone connector
input.
PROGRAM OUT
Line level balanced
outputs that are
programmable with
the
T
ieline
Tool
Box.
Can be controlled by
the PA controls.
AUX
RCA connector input and
output for the Auxiliary
input and output that is
programmable via the
Tool
Box
software.
CONTROL PORTS
Two opto-isolated
inputs and 2 CMOS
contact closures for
remote control.
RS232 Connection
Allows connection of the
codec to a PC for configuring
i
-Mix
G
3
settings with
Tool
Box
software. Can also
be used to connect to a GSM
phone for Bonded GSM.
USB 2 & RJ 45
LAN Connections
Connections for
LAN connections
and control by a
PC using
Tool
Box
Software
CAN PORT
Allows users to add
accessories such as
relay boxes and
opto-isolators or
control panels.
