Section 22: Connection Setup
T
ieline
T E C H N O L O G Y
Page 200
To program this setting with the codec itself press
SOFTKEY 4 Menu
and select
[Configuration] > [System Settings] > [Bonding Type]. Then select the bonding
setting you require.
22.6.
Configuring 4B Channel Connections (Commander Codecs
Only)
To configure the dialing of 4B channel connections via
Tool
Box
software simply
enter the four B channel numbers into the
Connection Setup
tab.
To enable this make sure you have checked the
Enable Connection
section on
the page, choose
Bonded ISDN
as the
Connection Type
and then click on each
connection number in turn and enter each B channel’s number. An example of
numbers that have been entered in this way are displayed in the following image.
Figure 59: 4B ISDN Profile in ToolBox
To scroll up and down the ISDN numbers click on the right hand arrows as
displayed in the following image.
It is also necessary to ensure four
Ports
are checked. If you are connecting using
a mono profile check one
Codec channel
and if you are connecting using a
stereo profile, check two
Codec channels.
Navigation
arrows to
scroll up
and down
the
numbers.
