Tieline i-Mix G3, Main Operation Manual

Page: 132 / 355

Section 15: Operation of your Codec
T
ieline
T E C H N O L O G Y
Page 132
Menu
Submenu
Secondary
Submenus
Secondary
Sub-menu
Options
Description of Secondary Submenu
Options
Additional
Options
Description of Additional Options
Both Programs a codec to encode and
decode bidirectional audio.
Encode Only Programs a codec to encode only.
Enc/Dec
Direction
Programs a codec to encode or decode
only, or encode and decode.
Decode Only Programs a codec to decode only.
Audio Bitrate Sets the maximum bit rate at which the
codec will attempt a connection. 9600bps –
33600bps
(default
9600bps)
Use the
MS
to scroll and set the
maximum bit rate.
Local FEC
Percent (UDP
only)
Configures the forward error correction
setting on the local codec.
Off (Default),
20%, 33%,
50%, 100%.
There are five settings in this menu
for UDP connections. For more info
see the IP sections of this manual.
Remote FEC
Percent (UDP
only)
Configures the forward error correction
setting on the remote codec.
Off (Default),
20%, 33%,
50%, 100%.
There are five settings in this menu
for UDP connections. For more info
see the IP sections of this manual.
Auto Jitter
Adapt Choose from: Least Delay; Less
Delay; Best Compromise (Default);
Good Quality; Highest Quality.
Jitter-Buffer
Programs the jitter-buffer setting on the
codec - either “Auto” or “Fixed”.
Fixed Buffer Enter the jitter-buffer milliseconds.
TCP Session
Port
Reprograms the TCP Session Port
number.
Audio Port Reprograms the codec Audio Port
number.
Configuration
cont…
IP1 & IP2
Setup
Exit Menu
Exits this submenu and goes to the
Configuration
submenu.
Table continued on the next page…