Section 28: Inputs Tab
T
ieline
Page 255
T E C H N O L O G Y
4.
The auxiliary input connections on the rear panel,
AUX IN
and
AUX
OUT,
are also controlled by the
PHONE COUPLER
section on the front
panel of the codec. The buttons on the front panel that can control the
auxiliary input source are the
CUE/HOLD
button and the
ON/OFF
button.
The
TAKE/RELEASE
button only controls the
PHONE
connection on the
codec
LCD
.
The Phone Coupler
Controls on the
i
-Mix
G
3
.
To the left the
PHONE
COUPLER
is in ‘off-air
cue’ mode and to the
right it is in ‘on-air’
mode.
28.7.4.
Phone Coupler Functionality within ToolBox
The functions available on the codec front panel are also available within
Tool
Box
software.
The incoming volume
(Vol)
setting for the
Phone Aux
input is
presented in
Tool
Box
as
displayed. It controls the level of the incoming signal. To adjust the level
simply click on the volume indicator (as highlighted) and drag it until the level
is set as desired. This setting is the ‘powerup’ level setting when you initially
power the codec up.
The operational functions for the
PHONE COUPLER
are also adjustable
within the
Control
menu within
Tool
Box
. The
Take
,
Cue/Hold
and
Off/On
buttons operate as they do on the codec front panel. The incoming audio
level can also be adjusted using the virtual fader. Simply click on the volume
indicator and drag it to adjust the level setting. You will note that the
incoming audio level will ‘duck’ when
Phone Aux
audio is sent from the
codec.
