Section 28: Inputs Tab
T
ieline
Page 250
T E C H N O L O G Y
Section 28.
Inputs Tab
The
Inputs
menu is used to configure input settings as well as
IGC
(intelligent gain
control) settings. The input settings that can be adjusted on the
Inputs
page of the
Profile Editor
are displayed in the following image.
Figure 70: The Inputs Menu in ToolBox
28.1.
Input Gains
T
ieline
codecs will handle inputs levels from -72
dB to +21 dBu. Depending on the codec you are
using, the number of inputs available will vary.
There are 5 gain settings on each input as shown
in the pull down menu to the right.
For information in relation to setting levels on all
T
ieline
broadcast codecs, please see the section in this manual titled PPM
Displays.
28.2.
Input Types
Following are some suggested input settings for various sources that can be
plugged into
T
ieline
codecs.
