background image

 

                                                                                       Appendix 6: Credit Notices 

T

ieline

 

 

T E C H N O L O G Y 

Page 351

  

Appendix 6.

 

Credit Notices

 

1.

 

Windows is a registered trademark of Microsoft Corporation in the United States 

and/or other countries. 

 

2.

 

Windows XP is a trademark of Microsoft Corporation in the United States 

and/or other countries. 

 

3.

 

Apple

®

 is a trademark of Apple Computer, Inc., registered in the U.S. and other 

countries. 

 

4.

 

Netscape

®

 is a registered trademark and the exclusive property of AOL Time 

Warner, Inc., or their respective subsidiaries, divisions and/or related companies. 

 

5.

 

Nokia is registered trademark of Nokia Corporation.  

 

6.

 

aacPlus is a trademark of Coding Technologies. 

 

7.

 

Comrex, Matrix and BlueBox are registered trademarks of Comrex Corporation. 

 

8.

 

Musicam is a registered trademark of Musicam USA. 

 

9.

 

CDMA2000

®

 is a registered certification mark of the Telecommunications 

Industry Association. Used under license. 

 

10.

 

Motorola is a registered trademark of Motorola, Inc. in the United States and/or 

other countries. 

 

11.

 

Mac is a trademark of Apple Computer, Inc., registered in the U.S. and other 

countries. 

 

12.

 

Linux® is the registered trademark of Linus Torvalds in the U.S. and other 

countries. 

 

13.

 

The Verizon and Verizon Business names and logos and all other names, logos, 

and slogans identifying Verizon's products and services are trademarks and 

service marks or registered trademarks and service marks of Verizon Trademark 

Services LLC or its affiliates in the United States and/or other countries. 

 

14.

 

Other product names mentioned within this document may be trademarks or 

registered trademarks, or a trade name of their respective owner. 

 

 
 

 
 

 
 
 

 
 

 
 

Summary of Contents for i-Mix G3




































































































































































































































































































































































Reviews: