Tieline Bridge-IT XTRA, User Manual

Page: 23 / 209

23
© Tieline Pty. Ltd. 2015
Bridge-IT XTRA Manual
Features Description
1 -16dBu PPM meter low point
2 +4dBu Nominal 0vu reference level at +4dBu
3 +20dBu +20dBu indication that should not be exceeded to prevent clipping
at +22dBu
4 PPM meter in clip PPM indication displays a solid section at the right-hand end
when audio is in danger of clipping
Audio Metering when Connecting to Tieline G3 Codecs
New generation Genie, Merlin and Bridge-IT IP codecs have more audio headroom than Tieline G3
audio codecs, therefore metering needs to be adjusted when connecting to a Commander or i-Mix
G3 codec. The G3 metering scale is between -11dBu and +18dBu and audio levels should average
around the nominal 0vu point. Audio peaks should not exceed +16dbu as indicated on the PPM
meter.
Features Description
1 -11dBu PPM meter low point
2 +4dBu Nominal 0vu reference level at +4dBu
3 +16dBu +16 indication where audio will clip/distort
Channel 1 Mic/Line Level Audio Adjustment
The default input level setting in the codec for channel 1 is line level. To adjust this setting for a mic-
level or unbalanced source:
1. Press the SETTINGS button.
2. Navigate to Audio and press .