Tieline Bridge-IT XTRA, User Manual

Page: 135 / 209

135
© Tieline Pty. Ltd. 2015
Bridge-IT XTRA Manual
Ethernet and VLAN interfaces can be configured for:
·
Control Only: codec control and command only from the Ethernet port.
· Control and Streaming: stream audio and control and command the codec via the Ethernet
port.
· Streaming audio: stream audio only from an Ethernet port ( VLANs only).
· Nothing: Disable the Ethernet port from streaming audio and codec command and control
(
VLANs only).
The Name text box, e.g. Primary or Secondary , is an interface identifier used when configuring
new programs via the Programs panel .
IPv4 Address Configuration
Click the Edit button in the Network panel to configure settings. The codec is capable of automatic
DHCP address assignment, or manually configured static IPv4 address configuration via the drop-
down
Configure IPv4 menu. If you want to ignore IPv4 settings select Off .
DHCP IP addresses are automatically assigned and can change each time you connect to your
Internet Service Provider, or to your own local area network (LAN). By default the codec is
configured for DHCP-assigned IP addresses.
Static IP addresses are fixed addresses that are recommended for studio installations, so that IP
address dialing remains the same over time for incoming codec connections.