Tieline Bridge-IT XTRA, User Manual

Page: 83 / 209

83
© Tieline Pty. Ltd. 2015
Bridge-IT XTRA Manual
2. Click the New Program symbol to open the wizard and then:
·
Click in the text box to name the new program.
· Select Multi-unicast , or if you want to use an existing program as a template, select this
option. Then click Next . Note: In this example we are creating a Multi-unicast program to dial
2 end points.
Important Note: When you decide to use an existing program as a template, the new
program inherits all the settings of the template program and you can adjust these settings
as required by continuing through the program wizard.
3. Enter a name for the Audio Stream and then click Next .
4. This audio stream connection in the wizard will allow the codec to dial. Enter the name of the
connection in the text box, then click Next .
5. Follow the instructions on the right-hand side of the panel to configure the transport settings for
the connection, then click Next . Note: only the first connection dialed in a multi-unicast program
can encode and decode audio. All other connections are unidirectional and encode only.