177
© Tieline Pty. Ltd. 2015
Bridge-IT XTRA Manual
See
Configuring IP Settings
for instructions on configuring this setting using the HTML5 Toolbox
web-GUI.
19.9
Configuring Data Packet Time-to-Live
Time-to-Live (TTL) is a value you can configure to set a finite life for data packets sent by the codec.
This avoids situations where packets can keep circulating through routers causing network
congestion.
The Time-to-Live setting is configurable and sets the maximum number of router hops allowable for
multicast data packets. In most situations the default value of
1
is used, to ensure packets are sent
through a single LAN router and not over multiple router hops and networks.
This setting is only used in
Multicast Server
mode.
1. Press the
HOME
button
to return to the
Home
screen, select
Connect,
then select
IP
and press the
button.
2. Select
Sessionless
and press
.
3. Press the right
navigation button to select
Multicast Server
and press
.
3. Press the down
navigation button to select
Setup
and press
.
4. Press the down
navigation button to select
TTL
and press
.
5. Press the
RETURN
button to delete the current setting and use the numeric
KEYPAD
to
enter a new value. Press
to confirm the new setting.
Summary of Contents for Bridge-IT XTRA
Page 18: ...18 Bridge IT XTRA Manual Tieline Pty Ltd 2015 Codec Menu Overview...
Page 19: ...19 Tieline Pty Ltd 2015 Bridge IT XTRA Manual Connect Menu...
Page 20: ...20 Bridge IT XTRA Manual Tieline Pty Ltd 2015 IP Setup Menu Navigation...
Page 21: ...21 Tieline Pty Ltd 2015 Bridge IT XTRA Manual Settings Menu...
